Florafelt Recirc Line – Installation Guide

Introduction

Welcome to the Florafelt Recirc Line Installation Guide provided by Big Grill Shop, your trusted source for high-quality outdoor cooking equipment and accessories. In this comprehensive guide, we will walk you through the step-by-step process of installing the Florafelt Recirc Line system for your outdoor kitchen. Whether you are a seasoned DIY enthusiast or a first-time installer, this guide will provide you with all the information you need to ensure a successful installation.

Chapter 1: Getting Started

Before diving into the installation process, it's important to gather all the necessary tools and materials. Here's a list of what you'll need:

• Florafelt Recirc Line Kit
• Measuring Tape
• Level
• Drill
• Screws
• Wrench
• Waterproof Sealant

Chapter 2: Preparing the Installation Area

Before installing the Florafelt Recirc Line system, it's essential to prepare the installation area. Follow these steps:

Step 1: Choose the Location

Select a suitable location for your Florafelt Recirc Line system. Ensure there is enough space for the entire setup, including the grill, sink, and other accessories.

Step 2: Clear the Area

Remove any debris, rocks, or plants from the installation area. It's important to have a clean and level surface for proper installation.

Step 3: Mark the Placement

Using a measuring tape, mark the desired location for the Florafelt Recirc Line system components. Ensure accurate measurements and adjust as needed.

Chapter 3: Installing the Florafelt Recirc Line System

Now that the installation area is prepared, let's move on to installing the Florafelt Recirc Line system itself. Follow these step-by-step instructions:

Step 1: Assemble the Components

Start by unpacking the Florafelt Recirc Line Kit and familiarize yourself with the different components. Follow the provided instructions to assemble the system properly.

Step 2: Position the Recirc Line Planter Modules

Place the Recirc Line planter modules in the marked locations, ensuring they are aligned correctly. Use a level to ensure proper horizontal positioning.

Step 3: Install the Recirculation Pump

Follow the manufacturer's instructions to install the recirculation pump at a convenient location within the system. Make sure to secure it properly.

Chapter 4: Finalizing the Installation

With the Florafelt Recirc Line system in place, it's time to finalize the installation to ensure optimum performance and longevity. Here's what you need to do:

Step 1: Connect the Water Supply

Connect the water supply line to the recirculation pump, ensuring a secure and leak-free connection. Check for any potential leaks and address them promptly.

Step 2: Test the System

Before adding plants or using the system, it's crucial to test it for proper functionality. Turn on the recirculation pump and check for any irregularities or malfunctions.

Step 3: Add Plants and Enjoy

Once the system has been tested and functions efficiently, it's time to add your desired plants to the Florafelt Recirc Line planter modules. Sit back, relax, and enjoy the beauty and convenience of your new installation.

Conclusion

Congratulations! You have successfully installed the Florafelt Recirc Line system for your outdoor kitchen. By following this installation guide from Big Grill Shop, you have ensured a smooth and hassle-free experience. If you have any further questions or need assistance, feel free to reach out to our dedicated support team. Happy grilling!